nezbitten's blog

Photo restroation and colourising - Part 2

posted by nezbitten, May 4, 2011 9:22 AM — 2 comments

This is the second part to adding colour or tinting an old photo when photo retouching for part one see colourising or tinting an old photo - Part 1

With the colour swatches obtained in the previous part we can select a set of tones that will suit the skin of the figure we are working on. In this instance I have simply grabbed a few to make a custom set to suit my image, but most sets will do.

You should initially create a layer stack of each colour in order from the lightest to the darkest. Each layer should be a fill of the plain colour with an overlay mode of "colour". Set up a mask to "hide all" on each and every layer. Your image to be coloured should be on the bottom of the stack.

Starting on the paler tones and with a soft, white brush set to around 10 to 20 % opacity paint over the whole face on the mask layer. Avoid the eyes and lips, teeth and hair. On the next tone do the same but over the areas of next darkest tone, thats everything but the highlights. Proceed through the layers like this, with the various tones as they get darker.

You can add reds for lips and cheeks and pink areas at the top of the stack. Paint the lips and add colour and life to those areas that may get flushed with red tones, perhaps where the skin is thinner on the face or in folds, on ears and around the eyes.

When you have painted them all go back to the bottom layer and adjust the opacity slider of each layer. The paler yellower tones should be fairly subtle and the darker tones may need a bit more encouragement to show through as shown in part 1.

The above shows the final stack with one added tone of blue for the eyes. As this figure is one of many in the final photo the amount of colours chosen for the skin was a mere handful, if it were a large image of just one face then many more shades and tones would be needed. Perhaps even some greenish blue tints as well for temples or necks where veins sometimes show through.

The dark brown coloured layer was set to vivid light which added some contrast to the dark tone whilst preserving the highlights and tinting to a darker shade.

The idea is you can adjust the layers as you see fit matching the intensity of each layer to suit the different effect or skin tone you are after.

Remember this is just one way to tint an old photo when photo retouching there are others!

Comments | RSS

1. posted by rhodiun, Jun 20, 2011 3:06 AM

Useful tutorial, thank you!

2. posted by normaal, May 9, 2011 2:29 PM

nice work thanks

You have to log in to add comments to this post.

freeimages blog archive

RSS feeds

All blog posts
Tutorial posts only


» Add your own post!

Recent blog comments

The Best of HiRes Photo Sharing Worlds
Nov 6, 2013 3:44 AM inizjall wrote
morgue is good option

Cloudy Scotland
Nov 6, 2013 3:43 AM inizjall wrote
thank you so much michel

Flayer Brochure
Nov 6, 2013 3:43 AM inizjall wrote
good share

Free Christmas mistletoe wreath with bells
Nov 6, 2013 3:42 AM inizjall wrote
perfect for christmass

Valentines Day Backgrounds
Nov 6, 2013 3:41 AM inizjall wrote
such a romantic background

This site uses cookies

By continuing to browse freeimages you are agreeing to our use of cookies. Find out more here.